Setting The Timer; Emptying The Water Tank - ProBreeze PB-AC04 Instruction Manual

Note: Fan mode can't be used in
dehumidifying mode.
Sleep Mode
Sleep mode is designed for you to use your
appliance with minimal disruption. The lights
will dim, the fan will be more slow and quiet
and the temperature will adjust for a cool
and undisturbed sleep. Sleep mode can
be turned on when the appliance is in cool
mode.
• Sleep mode can only be set using the
remote control.
• Press the sleep mode button once to
enter sleep mode. This can only be
activated when in cool mode.
• All the display panel lights will dim and
the fan speed will be set to low.
• The temperature will increase by 1℃
every hour for two hours.

SETTING THE TIMER

―
Setting a timer for the appliance to turn on
while it is off:
• Ensure the appliance is plugged in and
the power socket turned on.
• Press the timer button once.
• Use the increase and decrease buttons
to set how many hours you would like
before the appliance turns on.
• The timer can be set for 1 – 24 hours.
• The timer indicator light will light up
when the timer has been set.
• To cancel the timer, set the time to '0'.
14 | English
Setting a timer for the appliance to turn off
while it is on:
• Ensure the appliance is plugged in and
the power socket turned on.
• Turn the appliance on.
• Press the timer button once.
• Use the increase and decrease buttons
to set how many hours you would like
before the appliance turns off.
• The timer can be set for 1 – 24 hours.
• The timer indicator light will light up
when the timer has been set.
• To cancel the timer, set the time to '0'.

EMPTYING THE WATER TANK

―
When the water tank is full the appliance
will beep 20 times, the warning Ft will show
on the display and the appliance will pause
operation to prevent the water tank from
overflowing.
To empty the water tank:
1. Turn off the appliance and unplug it from
the wall socket.
2. Place a shallow tray underneath the
water outlet.
3. Unplug the drainage plug and allow the
water to collect in the shallow tray.
4. To fully empty the water tank gently tilt
the appliance back on its rear wheels.
Do not tilt more than 30 degrees.
5. Once empty, return the appliance to a
fully upright position and replace the
drainage plug.
6. Empty the shallow tray.
Note: If the shallow tray is not large enough
to hold all of the water from the appliance
replace the drainage cap to prevent water
from flowing onto the floor. Empty the
shallow tray and continue from step 2.
English | 15