Continuous Drainage; Cleaning & Storage - ProBreeze PB-AC04 Instruction Manual

CONTINUOUS DRAINAGE

―
Your appliance uses the moisture pulled
from the air to cool the condenser coils,
to better cool your air. While this means
less water must be dispelled form the
appliance, continuous drainage is useful
when your appliance is in dehumidifying
mode for extended periods of time. With the
continuous drainage hose connected, the
moisture collected from the air can drain out
the appliance as opposed to collecting in the
water tank. This means you will only need to
empty the water tank when dehumidifying in
high humidity conditions.
To connect a continuous drainage hose:
• Ensure the appliance is switched off and
not connected to power.
• Locate the main continuous drainage
hole.
• Unplug the drainage plug.
• Attach the water hose to the continuous
drainage hole.
• Ensure the water hose end has a
suitable drainage outlet, such as a drain
or bucket.
Note: Ensure the continuous drainage hose
is not kinked or wrapped around itself.
Note: Ensure that the end of the hose is not
fully submerged in water, to avoid an air lock
in the hose.
Note: When a continuous drainage hose is
connected to the continuous drainage plug,
you will still need to empty the secondary
drainage plug.
16 | English
SAFETY FEATURES
―
Automatic Defrost
At low room temperatures, frost may build up
inside the appliance. To solve this issue, the
appliance will automatically start defrosting.
• The power indicator light will blink.
• The appliance will turn off for 5–10
minutes to automatically defrost.
• It will then turn back on and resume its
previous setting.
Overload Protection
In the event of a power loss, the compressor
will delay for 3 minutes before turning back
on to protect the appliance.
CLEANING & STORAGE
―
Appliance Body Cleaning
WARNING: ALWAYS TURN THE
APPLIANCE OFF, UNPLUG
THE POWER CORD FROM THE
ELECTRICAL OUTLET AND ALLOW
THE APPLIANCE TO COMPLETELY
COOL DOWN BEFORE HANDLING OR
CLEANING IT.
CAUTION: DO NOT ALLOW WATER
TO ENTER THE MAIN UNIT AS
THIS CAN DAMAGE THE INTERNAL
ELECTRONICS.
CAUTION: DO NOT USE ANY
TOXIC, CORROSIVE, OR ABRASIVE
CLEANING AGENTS OR SCOURING
SPONGES TO CLEAN THE
APPLIANCE OR THE ACCESSORIES
SUPPLIED. THESE CAN DAMAGE THE
SURFACE. DO NOT SPRAY CLEANING
AGENTS DIRECTLY ONTO OR INTO
THE APPLIANCE.
CAUTION: DO NOT USE ANY
ABRASIVE CLEANERS OR SOLVENTS,
AS THIS CAN DAMAGE THE
APPLIANCE.
• Do not attempt to clean the appliance in
any other way than that detailed by the
manufacturer
• Empty the water tank prior to transport
and storage
• Clean the exterior surface of the
appliance by wiping it with a soft, damp
cloth. Dry the appliance with a soft,
clean cloth.
• The filter should be cleaned every two
weeks using a damp cloth
• Always empty the water tank, clean and
dry the appliance when not in use to
prevent mould.
• Use a soft dry cloth to clean up water
that may collect around the grills at the
back of the appliance.
• Cleaning and user maintenance shall not
be made by children
• Clean the vents and openings of the
appliance regularly with a vacuum
cleaner, using the brush attachment to
avoid any dust build-up.
• To store your product, we recommend
using the original or a similar sized box.
• Ensure the appliance, filters, and water
tank are clean and dry before storage.
• Store the appliance in a safe, clean and
dry place, out of reach of children when
not in use.
• Remove the heat exhaust hose and
continuous drainage hoses before
storing.
• Always keep the appliance upright in
storage.
• Before storage, dry out the appliance by
leaving it unplugged in a dry open space
for 48 hours. Alternatively, Have the
appliance on and in low fan mode until
the continuous drainage hose is dry.
English | 17