Installing The Software/Drivers - Canon imageCLASS LBP122dw Setup Manual

1
Wired LAN
Connect the router to the machine with a LAN cable and
then select <No> in the screen for choosing how to
connect to the network.
Rear
Setting Up the Toner
9
Replenishment Service
Use this procedure to set up the toner replenishment
service. To use this service, you must enter into an
agreement beforehand.
1.
Select an option based on whether you
subscribed to the toner replenishment
service when you purchased the machine.
• If you subscribed to the service, select <Yes>.
• If you did not subscribe to the service, select
<No> and proceed to step
2.
Check the message and press
3.
Check the conditions of use, and then
choose whether or not to use the service.
• To use the service: <Accept>.
• To not use the service or not enter into an
agreement: Select <Do Not Accept> and proceed
to step .
10
4.
When <Connection was successful.> appears,
press .
Ending the Setup Guide
10
1.
Check the message and press
To save the date/time settings, the battery must be
charged for 24 hours. After you end the Setup Guide,
be sure to leave the mains power to the machine ON
for at least 24 hours.
5 6 7
.
10
.
.
5
8 9
Installing the Software/
11
Drivers
To use the print function of the machine, you must install
the printer driver.
Downloading from the Canon website
1.
Search for "(model name) download."
XXXXXXX download
Example: LBP122dw download
If you cannot find the download site, go to
https://global.canon/en/support/
2.
Download the software and drivers, and
install them on your computer.
Installing from the Bundled CD/DVD-
ROM
1.
Load the CD/DVD-ROM into your computer,
and install the software and drivers.
For normal installation, select "Easy Installation. "
Selecting "Easy Installation" installs the drivers along
with the standard software and manuals.
If a problem arises during the installation, see
"Questions Related to Drivers" in "FAQ. "
Accessing the FAQ
p. 6 "Accessing the Online Manual"
10 11
En
Fr
Es
Pt