Technimount System BRACKET PRO 120-GR3 User Manual page 18

INSTALLATION OF THE BAXTER PUMPS ONTO THE BRACKET (CONTINUED)
4. Lower the top part of the holder over the pump
until you hear the click sound.
NOTE:
Make sure the pump is securely fastened in its holder.
5. Repeat steps 2 to 4 to install up to three pumps
onto the bracket.
6. Once properly locked the Baxter pumps are
ready for EMS transport.
Return To Table of Contents
18
Installation Guide
UG-BP120-GR3-202302EN-01 www.technimount.com