Subscribe to Our Youtube Channel
Related Manuals for Jetson Helio X
Summary of Contents for Jetson Helio X
- Page 1 Helio X Kick Scooter. A guide for your ride. IMPORTANT: READ CAREFULLY AND RETAIN FOR FUTURE REFERENCE. MODELS: JHLIOX-BLK | JHLIOX-SIL | JHLIOX-WHT | JHLIOX-PNK | JHLIOX-BLU Designed in Brooklyn | Made in China...
- Page 3 Jetson's top two riding rules: Be safe. Have fun!
-
Page 5: Table Of Contents
......................6 Specs & Features ......................8 Unfolding/Folding the Helio X ....................9 Assembly ... -
Page 6: Safety Warnings
Safety Warnings • Before use, please read the user manual and safety warnings carefully, and make sure you understand and accept all the safety instructions. The user will be responsible for any loss or damage caused by improper use. • Before each cycle of operation, the operator shall perform the preoperation checks specified by the manufacturer: That all guards and pads originally supplied by the manufacturer are in proper place and in serviceable condition;... - Page 7 For more information go to: www.P65Warnings.ca.gov. MODIFICATIONS Do not attempt to disassemble, modify, repair, or replace the unit or any components of the unit without instruction from the Jetson Care Team. This will void any warranty, and can lead to malfunctions which may cause injury.
-
Page 8: Product Overview
Product Overview 1. HANDLEBAR 2. STEM CLAMP WITH LEVER 3. STEM (LED LIGHT-UP) 4. FRONT WHEEL (MOTION-ACTIVATED LED LIGHT-UP) 5. FOLDING CLAMP LOCK 6. FOLDING LEVER 7. FOLDING CLAMP KNOB 8. POWER BUTTON 9. DECK (LED LIGHT-UP) 10. REAR FOOT BRAKE 11. - Page 9 PLEASE NOTE: IMAGES MAY NOT REFLECT EXACT APPEARANCE OF ACTUAL PRODUCT.
-
Page 10: Specs & Features
Specs & Features • WEIGHT LIMIT: 132 LBS • PRODUCT WEIGHT: 5.7 LBS • WHEEL SIZE: 4” • FOLDED DIMS: L24” × W1” × H8” • UNFOLDED DIMS: L24” × W11” × H29” • DECK DIMS: 18” × 4” • HANDLEBAR HEIGHT: 29”- 33.5” •... -
Page 11: Unfolding/Folding The Helio X
1. Getting Started Unfolding/Folding the Helio X • OPEN THE FOLDING CLAMP LOCK BY PULLING IT OUTWARDS. FOLDING CLAMP LOCK... - Page 12 • LOOSEN THE FOLDING CLAMP KNOB. KNOB...
- Page 13 • LIFT FOLDING LEVER AND RAISE STEM UP. TO UNFOLD: WHILE LIFTING THE LEVER, RAISE THE STEM AWAY FROM THE SCOOTER DECK UNTIL IT CLICKS INTO PLACE IN THE VERTICAL POSITION. TO FOLD: WHILE LIFTING THE LEVER, LOWER THE STEM UNTIL IT IS HORIZONTAL AND CLICKS INTO PLACE ABOVE THE DECK.
-
Page 14: Assembly
THE PRE-DRILLED HOLES IN THE STEM. • INSERT THE BOLT THROUGH ALL FOUR HOLES AND TWIST THE NUT ONTO THE END. TIGHTEN WITH THE 2-BIT TOOL. IMPORTANT: PLACE THE NUT ON THE RIGHT SIDE WHEN FACING THE FRONT OF THE HELIO X. BOLT... -
Page 15: Adjusting The Handlebar
STEM CLAMP PIN HOLE Adjusting the Handlebar • OPEN THE STEM CLAMP. • WHILE PRESSING IN THE STEM PIN, LIFT OR LOWER THE HANDLEBAR UNTIL THE STEM PIN CLICKS INTO ANOTHER STEM PIN HOLE. STEM PIN... - Page 16 • TIGHTEN AND CLOSE STEM CLAMP TO LOCK. MAKE SURE THE HANDLEBAR IS SECURE. HANDLEBAR SAFETY NOTES: * TO KEEP THE STEM AND HANDLEBAR SECURED, THE STEM PIN MUST BE CLICKED INTO A STEM PIN HOLE AND THE STEM CLAMP MUST BE CLOSED AND TIGHT.
-
Page 17: Using The Brake
Using the Brake PRESS DOWN TO COME TO A COMPLETE STOP... -
Page 18: Charging The Batteries
BATTERY DOOR Changing the Batteries BATTERY DOOR: 1. OPEN THE BATTERY DOOR WITH THE SCREWDRIVER TIP OF THE 2-BIT TOOL. 2. PLACE 3 AA BATTERIES INSIDE (NOT INCLUDED). 3. CLOSE THE BATTERY DOOR WITH THAT SAME SCREWDRIVER. -
Page 19: Riding The Helio
2. Making Moves Riding the Helio X • PLACE ONE FOOT IN FRONT. • PLACE THE OTHER FOOT IN BACK AT 70 - 90° ANGLE. • ROTATE THE HANDLEBAR TO THE LEFT OR RIGHT TO MAKE TURNS. -
Page 20: Activating The Deck And Stem Lights
Activating the Deck and Stem Lights LED LIGHT FUNCTIONS: 1. PRESS THE POWER BUTTON TO TURN ON THE HELIO X DECK AND STEM LIGHTS. 2. PRESS THE POWER BUTTON AGAIN TO CYCLE THROUGH THE 20 LED PATTERNS; TO TURN OFF THE LIGHTS HOLD DOWN THE POWER BUTTON FOR 3 SECONDS. -
Page 21: Helmet Safety
Helmet Safety PROPER POSITIONING: IMPROPER POSITIONING: THE FOREHEAD IS COVERED THE FOREHEAD IS EXPOSED. BY THE HELMET. A FALL COULD RESULT IN SERIOUS INJURY. * WEAR A HELMET, APPROPRIATE CLOTHING, SHOES, AND SAFETY GEAR. AVOID CLOTHING THAT CAN GET CAUGHT INTO OR UNDER THE WHEELS. -
Page 22: Care & Maintenance
CLEANING THE HELIO X TO CLEAN THE HELIO X, CAREFULLY WIPE WITH A DAMP CLOTH, THEN DRY WITH A DRY CLOTH. DO NOT APPLY WATER DIRECTLY TO THE HELIO X. WATER CAN CAUSE DAMAGE TO THE FRAME AND ELECTRICAL COMPONENTS. - Page 23 Stay connected. Be sure to follow @ridejetson on social media to learn about fantastic offers, giveaways, and all the latest Jetson news. Loving your ride? Then be sure to leave a review at ridejetson.com/reviews. We can’t wait to hear from you!
- Page 24 Made in China Date Code: 05/2022 © 2022, JETSON. ALL RIGHTS RESERVED. Manufactured by JETSON ELECTRIC BIKES LLC. No portion of this document, including shape, copy, graphics, and design, may be reproduced or transmitted in any form or by any means.
Need help?
Do you have a question about the Helio X and is the answer not in the manual?
Questions and answers