Microphone Board Removal
Prerequisite:
LCD Bezel Removal
1. Find the microphone board (A) on the LCD cover. Refer to
2. Peel back the tape (B) securing the microphone cable (C) to the microphone board
(A)
(Figure
3-40).
3. Disconnect the microphone cable (C) from the connector
NOTE:
NOTE:
Use care not to damage the cable.
Figure 3-40. Microphone Connector Location
4. Gently lift and remove the microphone board (A) from the LCD cover
Figure 3-41. Microphone Board Removal
Machine Maintenance Procedures
A
B
C
A
Figure
3-37.
(Figure
3-40).
(Figure
0
3-41).
3-35