Right USB Type-C Port Test
CAUTION:
!
Any data in the inserted USB drive will be cleared during the USB test. Ensure
that you either use an empty USB drive or back up all the data located in the
drive before you proceed with the USB test.
1. Connect a USB 3.0 drive to the USB Type-C port on the right side of the system via
a Type A-to-Type-C USB cable as shown in
Figure 2-75. Right USB Type-C Port
Figure 2-76. Right USB Type-C CC1 Performance Test
2. Remove the USB 3.0 drive when the progress bar reaches 100%.
Figure 2-77. Right USB Type-C CC1 Performance Test
2-36
Figure
2-75.
0
System Utilities