Fan; Removing The Fan - Dell Inspiron 16 5635 Owner's Manual

Steps
1. Align the notch on the M.2 2280 solid-state drive with the tab on the solid-state drive slot.
2. Gently slide the M.2 2280 solid-state drive into the solid-state drive slot.
3. Replace the screw (M2x3) to secure the M.2 2280 solid-state drive to the system board.
Next steps
1. Install the base cover.
2. Follow the procedure in

Fan

Removing the fan

Prerequisites
1. Follow the procedure in
2. Remove the base cover.
About this task
NOTE: Before removing the base cover, ensure that there is no SD card installed in the SD card slot on your computer.
The following image(s) indicate the location of the fan and provides a visual representation of the removal procedure.
42 Removing and installing Customer Replaceable Units (CRUs)
After working inside your
Before working inside your
computer.
computer.