Table of Contents
Advertisement
● Phillips screwdriver #0
● Phillips screwdriver #1
● Torx #5 (T5) screwdriver
● Plastic scribe
Screw list
NOTE:
When removing screws from a component, it is recommended to note the screw type, the quantity of screws, and
then place them in a screw storage box. This is to ensure that the correct number of screws and correct screw type is
restored when the component is replaced.
NOTE:
Some computers have magnetic surfaces. Ensure that the screws are not left attached to such surfaces when
replacing a component.
NOTE:
Screw color may vary with the configuration ordered.
Table 25. Screw list
Component
Base cover
Base cover
Battery
Wireless card
Solid-state drive
Solid-state drive
Fan
Heat sink
System board
USB Type-C bracket
Power button with fingerprint
reader
Power-button board
I/O board
Touchpad bracket
Touchpad bracket
28
Working inside your computer
Screw type
Quantity
M2x7.5 - captive
2
screws
M2x4
7
M2x3
5
M2x3
1
M2x3
1
M2x1.8
1
M2x3
3
Captive screw
4
M2x1.8
2
M2x4
2
M2x3
1
M2x3
2
M2x3
1
M2x2
5
M2x1.8
7
Screw image
Advertisement
Table of Contents
