Table of Contents
Advertisement
The buttons situated above the faders feature some enhancements over the original. They
allow easy access to 4 functions, including convertor output modes. These buttons are
latching and can be toggled on/ off. However, you will always have one of the convertor
output mode selected, whether Vintage or Modern. Vintage modes are signified by a color
LED, yellow for Vintage modes and blue for Modern.
The Faders not only replicate those found on the original but also add a wet/ dry mix to
enable you to easily blend the reverb when inserted. When operating a fader the display
above shows the value and relevant measurement unit.
3.1.2. Fine Adjustments
To adjust a control more slowly and precisely use the right mouse button, while operating it.
You can also hold Control (Windows and macOS) whilst drag while holding the left mouse
button.
3.1.3. Parameter Name Display
Hovering on any control will cause its full name to appear in the left side of the Lower
Toolbar.
3.1.4. Double Click for Default
Last but not least, you can double-click on any control to return it to its default value. To reset
an arc, double-click inside the arc.
9
Arturia - User Manual REV LX-24 - Main Panel
Advertisement
Table of Contents
