Insert Suction Nozzle (Br 30/4 C Adv Only) - Kärcher BR 30/4 C Service Manual

1 Dirt water reservoir
2 Release, wastewater reservoir
Push the release for the wastewater reservoir
down and remove the wastewater reservoir from
the appliance toward the front.
1 Dirt water reservoir
2 Cover dirt water reservoir
3 Air suction opening
4 Wastewater inlet opening
5 Lock, lid
The lid of the wastewater reservoir houses the air
suction opening and the wastewater inlet opening.
In order to remove the lid, open the lock and pull
the lid off the wastewater reservoir upwards.
1 Wastewater inlet opening
2 Water separator
3 Cover dirt water reservoir
4 Seal
5 Floater seal
6 Locking flap
7 Float
The floater is located in the lid. This floater closes
up the air suction opening and suctioning is no
longer possible.
The wastewater reservoir needs to be emptied.

4.5.4 Insert suction nozzle (BR 30/4 C Adv only)

With model BR 30/4 C Adv, a suction nozzle can be
attached to vacuum in corners.
1 Suction pipe holder
2 Suction pipe
Remove the suction pipe from the suction pipe
holder.
English 5.906-434.0 Rev. 00 (12/10)
13