Front Runner KSTF003T Quick Start Manual page 5

Toyota 4runner (2010 - current) slimsport roof rack kit

FIT AND SECURE

4.1

4.2

KSTF001_REV_A04

Place silicone into and around each of the

ﬁxing points.

Place Spacers (Item 12) over the mounting

holes.

Remove the backing from the double sided

tape (4.2a) on the bottom of the Support Plate

01 (Item 3) and push the plate ﬁrmly down

10mm

onto the body of the vehicle.

13mm

Secure Rack assembly 2.2 using M6 x

12 x 1 Flat Washers, M6 Spring Washers

and M6 x 30 Hex Bolts for front foot

(Items 14, 15 & 17).

Place a bead of silicone down the length of

each M6x20 bolt before inserting.

Secure the middle and back feet using M8 x

19 x 2 Flat Washers, M8 Spring Washers and

M8 x 60 Hex Bolts (Item 18, 13 & 14).

Fasten the front foot by inserting the fastener

(item 17) through the double sided tape and

securing into the Jack Nut ﬁtted earlier.

Fully tighten all fasteners.

Place M6 and M8 Nut Caps over all hex Bolts.

Kstf002t