Related Manuals for Dometic VMD2.5
Summary of Contents for Dometic VMD2.5
- Page 1 CLIMATE CONTROL MARINE SELF-CONTAINED VMD2.5 Display Marine Air Conditioner Display Installation and Operating manual........3...
- Page 2 Copyright © 2023 Dometic Group. The visual appearance of the contents of this manual is protected by copyright and design law. The underlying technical design and the products contained herein may be protected by design, patent or be patent pending. The...
-
Page 3: Table Of Contents
This product manual, including the instructions, guidelines, and warnings, and related documentation, may be subject to changes and updates. For up-to-date product information, please visit documents.dometic.com. -
Page 4: Intended Use
3 Intended use The VMD2.5 Display (hereinafter referred to as display or product) is the control interface for operating compatible marine air conditioning systems. This display is only suitable for the intended purpose and application in accordance with these instruc- tions. -
Page 5: Specifications
Screwdriver/bit Drill Marker Sabre saw/multi-tool saw Display dimensions Width Height Display with bezel 4.7 in (119 mm) 3.3 in (84 mm) Compatibility This display is compatible with TX-series marine air conditioners. Available modes and features This section lists the available modes, functions, and features. Refer to the Operation on page 7 section for details. -
Page 6: Installation
NOTICE! Do not locate the display panel in direct sunlight, near any heat-producing appliances, or in a bulkhead where tempera- tures radiating from behind the panel may affect performance. This section describes the actions to complete prior to installing the display. Choosing the display location •... -
Page 7: Operation
1. Route one end of the display cable through the electrical control box of the air conditioner and plug it into the jack on the cir- cuit board. Display cable Jack 2. Route the other end of the display cable through the wall opening and plug it into the jack on the back of the display. 3. - Page 8 Eco mode indicator Mode control Temperature up control Fan speed control Table 1: Home screen controls and status indicators Icon Control/indicator Description Mode indicator The mode icon shows the current operating mode. The icon is animated when the compressor is running and static when it is not running. The icon flashes when the compressor cycles off...
- Page 9 Icon Control/indicator Description Up arrow Tap to raise the temperature on the Home screen. On other screens, tap to nav- igate to the previous menu and/or raise a numerical value. Temperature/set point The indicator displays the new temperature set point while the temperature set 70 F indicator point is adjusted with the Up Arrow or Down Arow, then displays the tempera-...
- Page 10 Icon Control/indicator Description Tap to confirm an entry. Return home Tap to return to the Home screen. Save Tap to save an entry. Eco mode Note Eco mode and Quiet mode can be active at the same time. The system will operate at the set point that is the low- est.
- Page 11 1. On the Home screen, tap Main Menu. 2. Tap Function. 3. Tap Quiet Mode. 4. Tap the Down Arrow. 5. Tap Quiet Mode Set Point. 6. Tap the Le Arrow or Right Arrow to adjust the set point. 7.
- Page 12 2. Tap Parameters, then use the Up Arrow and Down Arrow to scroll through the selections. Selection Description Actions Memorize Setting This selection memorizes the current settings for all parameters 1. Tap Memorize Settings. providing a system-wide point that can be returned to when 2.
- Page 13 Selection Description Actions Set Point Temp Differential This selection adjusts the temperature differential between the 1. Tap Set Point Temp Differential. set point and the cabin temperature reading which is used to 2. Tap the Le Arrow or Right Arrow to determine when the system cycles on.
- Page 14 Troubleshoot 1. From the Home screen, tap Main Menu. 2. Tap Troubleshoot, then use the Up Arrow and Down Arrow to scroll through the selections. Selection Description Action Fault History This selection provides the history of any faults that have 1.
- Page 15 8.9.2 Setting the date format This setting gives the option to display the date in different formats. The default is MM-DD-YYYY. 1. From the Home screen, tap Main Menu. 2. Tap Date & Time. 3. Tap Date Format. 4. Tap the Le Arrow or Right Arrow to scroll through the formats. 5.
-
Page 16: Troubleshooting
9 Troubleshooting Problem Possible cause Suggested remedy The system does not power up. The circuit breaker for the air conditioner is Turn on the circuit breaker at the vessel's off. panel. The power button is off on the display. Turn on the power button on the display. - Page 17 Problem Possible cause Suggested remedy The auxiliary electric heater is enabled but 1. On the Parameters menu, set Aux Elec not connected. Heat to Off. 2. Verify that the breaker for the auxiliary heater is in the on position. The mode is not set to Heat on the display.
- Page 18 Problem Possible cause Suggested remedy 2. Remove the hose from the pump dis- charge to purge air from the line, then replace. The seawater pump is not running. 1. Ensure the pump is not damaged from being run dry. 2.
- Page 19 Problem Possible cause Suggested remedy 2. If the problem persists, contact a quali- fied service technician. Fault: DC Low Voltage The battery capacity is reduced. 1. Charge or replace the battery bank. 2. If the problem persists, contact a quali- fied service technician.
-
Page 20: Disposal
Refer to the sections below for information about warranty and warranty support in the US, Canada, Australia, New Zealand, and all other regions. United States and Canada LIMITED WARRANTY AVAILABLE AT DOMETIC.COM/EN-US/TERMS-AND-CONDITIONS-CONSUMER/WARRANTY. IF YOU HAVE QUESTIONS, OR TO OBTAIN A COPY OF THE LIMITED WARRANTY FREE OF CHARGE, CONTACT: DOMETIC CORPORATION MARINE...