Bosch PLS User Manual page 6

Parking Lot Sensor | PLS
To provide the adhesive with a closed substrate, the ground surface must be free of any gaps or misalignment (see
Figure 4 Available parking space for sensor installation). This is not only crucial for the contact surface and the
adhesive effect of the product, but also to avoid structural issues when a car runs over it.
Figure 5 Substrate example (continuous)
Do not install the product on an unstable or uneven ground surface, like interlocking paving stone or
directly on the bare ground. These installations can harm the product!
Figure 7 Example of a not compliant installation
© Robert Bosch France SAS 2022. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the
event of application for industrial property rights. Data subject to change without notice. Printed in France, December 2022.
Figure 6 Substrate example (gap)
Precaution
6 | 18