Bosch PLS User Manual page 10

Parking Lot Sensor | PLS
Figure 11 Installing the sensor – example
Respecting the insertion process described above is necessary for an easy and smooth installation, and
to ensure that the core is correctly placed into the base for a good watertightness.
Respecting the tightening torque is important to avoid damaging the screw pitch of the base.
 Insert completely the sensor core into the base before screwing!
 Do not install the core with your feet!
 Do not use a blunt object (like a hammer) to insert the core into the base!
© Robert Bosch France SAS 2022. All rights reserved, also regarding any disposal, exploitation, reproduction, editing, distribution, as well as in the
event of application for industrial property rights. Data subject to change without notice. Printed in France, December 2022.
Precaution
10 | 18