Cleaning The Accessories; Cleaning The Control Panel; Cleaning The Inside Of The Oven (Cooking Area) - Beko BBIE12300XD User Manual

cleaning materials. They can damage
the glass surface.
• Clean with dishwashing detergent,
warm water and a soft cloth or
spon ge and dry it with a dry cloth.
• lf there is residual detergent after
cleaning, wipe it with cold water and
dry it with a soft cloth. Residual
detergent residue may damage the
glass surface next time.
• Under no circumstances should the
dried-up residue on the glass surface
be peeled off with serrated knives,
wire wool or similar scratching tools.
• You can remove the calcium stains
(yellow stains) on the glass surface
with the commercially available
descaling agent, with a descaling
agent such as vinegar or lemon juice.
• lf the surface is heavily soiled, apply a
sponge to the cleaner and wait a long
time for it to work properly. Then clean
the glass surface with a wet cloth.
• Discolorations and stains on the glass
surface are normal and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted
surfaces using dishwashing detergent,
warm water and a soft cloth or
spon ge and dry them with a dry cloth.
• Do not use hard metal scrapers and
abrasive cleaners. lt may damage the
surfaces.

Cleaning the accessories

Unless otherwise stated in the user
manual, do not wash the product
accessories in the dishwasher.

Cleaning the control panel

• When cleaning the control panels from
the button, wipe the panel and
buttons with a damp soft cloth and
dry with a dry cloth. Do not remove
the buttons and gaskets underneath
to clean the panel. The control panel
and buttons may be damaged.
• Clean the touch control panels with a
damp soft cloth and dry with a dry
cloth. lf your product has a key loek
feature, set the key loek before
performing control panel cleaning.
Otherwise, incorrect detection may
occur on the keys.
Cleaning the inside of the
oven (cooking area)
Follow the cleaning steps described in
the "General cleaning information"
section according to the surface types in
your oven.
Cleaning the side walls of the
oven
The side walls in the cooking area can
only be covered with enamel or catalytic
walls. lt varies by model. lf there is a
catalytic wall, refer to the "Catalytic
walls" section for information.
lf your product is a wire shelf model,
remove the wire shelves before cleaning
your side walls. Then complete the
cleaning as described in the "General
cleaning information" section according
to the side wall surface type.
To remove the side wire shelves:
1 . Remove the front of the wire shelf by
pulling it on the side wall in the
opposite direction.
2.Pull the wire shelf towards you to
remove it com letel .
33/EN