Cleaning Accessories; Cleaning The Control Panel; Cleaning The Inside Of The Oven (Cooking Area) - Beko BBIS13300XMPE User Manual

Table of Contents

Advertisement

Available languages

Available languages

• If the surface is heavily soiled, apply the
cleaning agent on the stain with a
sponge and wait a long time for it to
work properly. Then clean the glass sur-
face with a wet cloth.
• Discolorations and stains on the glass
surface are normal and not defects.
Plastic parts and painted surfaces
• Clean plastic parts and painted surfaces
using dishwashing detergent, warm wa-
ter and a soft cloth or sponge and dry
them with a dry cloth.
• Do not use hard metal scrapers and ab-
rasive cleaners. They may damage the
surfaces.
• Ensure that the joints of the components
of the product are not left damp and with
detergent. Otherwise, corrosion may oc-
cur on these joints.

7.2 Cleaning Accessories

Do not put the product accessories in a
dishwasher unless otherwise stated in the
user's manual.

7.3 Cleaning the Control Panel

• When cleaning the panels with knob-
control, wipe the panel and knobs with a
damp soft cloth and dry with a dry cloth.
Do not remove the knobs and gaskets
underneath to clean the panel. The con-
trol panel and knobs may be damaged.
• While cleaning the inox panels with knob
control, do not use inox cleaning agents
around the knob. The indicators around
the knob can be erased.
• Clean the touch control panels with a
damp soft cloth and dry with a dry cloth.
If your product has a key lock feature, set
the key lock before performing control
panel cleaning. Otherwise, incorrect de-
tection may occur on the keys.
7.4 Cleaning the inside of the oven
(cooking area)
Follow the cleaning steps described in the
"General Cleaning Information" section ac-
cording to the surface types in your oven.
Cleaning the side walls of the oven
The side walls in the cooking area can only
be covered with enamel or catalytic walls.
It varies by model. If there is a catalytic
wall, refer to the "Catalytic surfaces" sec-
tion for information.
If your product is a wire shelf model, re-
move the wire shelves before cleaning the
side walls. Then complete the cleaning as
described in the "General Cleaning Inform-
ation" section according to the side wall
surface type.
To remove the side wire shelves:
1. Remove the front of the wire shelf by
pulling it on the side wall in the oppos-
ite direction.
2. Pull the wire shelf towards you to re-
move it completely.
3. To reattach the shelves, the procedures
applied when removing them must be
repeated from the end to the beginning,
respectively.
Cleaning the water pool on the base of the
oven
Depending on the frequency of steam as-
sisted cooking-easy steam cleaning oper-
ations and the hardness of the water used,
lime stains may occur in the water pool on
the base of the oven.
To remove the lime that may occur in
the water pool on the oven base after
steam assisted cooking-easy steam
cleaning operations, after every 2 or 3
operations:
EN / 35
EN
ES

Advertisement

Chapters

Table of Contents
loading

Table of Contents