Cleaning The Oven Lamp - Beko BBIE12300XD User Manual

Table of Contents

Advertisement

slot. (lf your product has an inner
glass). Inner glass (2) must be
attached to the plastic slot closest to
the innermost glass (1).
6.While reassembling the innermost
(1),
glass
pay attention to place the
printed side of the glass on the inner
glass. lt is crucial to place the lower
corners of the innermost glass
meet the lower plastic slots.
7. Push the plastic component towards
the frame until a "click" sound is heard.

Cleaning the oven lamp

In the event that the glass door of the
oven lamp in the cooking area becomes
dirty; clean using dishwashing detergent,
warm water and a soft cloth or sponge
and dry with a dry cloth. In case of oven
lamp failure, you can replace the oven
lamp by following the sections that
follow.
Replacing the oven lamp
A
General warnings
• To avoid the risk of electric shock
before replacing the oven lamp,
disconnect the electrical connector
and wait for the oven to cool. Hot
surfaces may cause burns!
• The oven lamp is a special electric
bulb resistant to 300 ° C. Oven lamps
can be obtained from Authorized
Services.
• The position of the lamp may differ
from that is shown in the figure.
• The lamp used in this product is not
suitable for use in the lighting of home
rooms. The purpose of this lamp is to
help the user see food products.
• The lamps used in this product must
withstand extreme physical conditions
such as temperatures above 50 ° C.
lf your oven has a round lamp,
1 . Disconnect the product from the
electricity.
36/EN
2.Remove the glass cover by turning it
counterclockwise.
(1)
to
3. lf your oven lamp is type (A) shown in
the figure below, rotate the oven lamp
as shown in the figure and replace it
with a new one. lf type
pull it out as shown in the figure and
replace it with a new one.
4.Refit the glass cover.
lf your oven has a square lamp,
1 . Disconnect the product from the
electricity.
2.Remove the wire shelves according to
the descri tion.
3.Lift the lamp's protective glass cover
with a screwdriver.
4. lf your oven lamp is type (A) shown in
the figure below, rotate the oven lamp
(B)
is a model,

Advertisement

Table of Contents
loading

Table of Contents