Table of Contents
Advertisement
SET OR CHANGE THE CLOCK
1.
Press SELECT to switch to the Clock Mode.
The time will flash.
2.
Press and hold SELECT for 2 seconds to enter
the setting mode.
3.
Select the 12/24-hour format, hour, and minute.
Press UP or DOWN to change the setting. Press
SELECT to confirm.
ALARM
When activated, the Beep Alarm starts quietly, then
gradually becomes louder. It shuts off at two minutes. The
LCD display lights up for the first 8 seconds.
SET ALARM
1.
Press SELECT several times until the Alarm area
flashes.
2.
Press and hold SELECT for 2 seconds to enter the
setting mode.
3.
Select the hour and minute. Press UP or DOWN
to change the setting. Press SELECT to confirm.
4.
Press SELECT again when you are finished.
SNOOZE
Press the SNOOZE/LIGHT button the top of the unit to
temporarily disable the alarm for 8 minutes. The alarm icon
will blink while Snooze is activated.
8
Advertisement
Table of Contents
