Backlight - Oregon Scientific PSM03A User Manual

BACKLIGHT

Press SNOOZE/LIGHT to illuminate the backlight for
5 seconds.
CONTINUOUS BACKLIGHT
The AC power adapter must be plugged in to use this
feature ( 8).
1. The BACKLIGHT switch is located in the battery
compartment. Move it to the "ON" position to
enable the continuous backlight. Move it to the
"OFF" position to disable.
2. Move it to the "AUTO" position to enable
continuous backlight controlled by light intensity.
When activated, the backlight will be on
whenever the unit perceives that the room is dark.
PS M03 English R18
3.
4.
19
19
The Light sensitivity knob is located in the
battery compartment. Rotate to adjust.
When activated, the continuous backlight will be
half as bright as usual. To achieve full
brightness, press SNOOZE/LIGHT.
LIGHT SENSOR
LIGHT
ON OFF AUTO
RESET
7/16/03, 1:04 PM