Advertisement
(FIG 1)
(FIG 2)
(FIG 3)
LOCATION | MEANING |
Clock / alarm and indoor temperature area | Main unit batteries low |
Outdoor temperature area | Sensor batteries low |
Connect the supplied power adapter to the power jack, then plug into a standard AC outlet.
NOTE:
The main unit can collect data from up to 3 sensors.
To set up the sensor:
TIP Ideal placements for the sensor would be in any location on the exterior of the home at a height of not more than 1.5 m (5 ft) and which can shield it from direct sunlight or wet conditions for an accurate reading. consumer grade lithium batteries in temperatures below freezing.
NOTE: Use alkaline batteries for longer usage and consumer grade lithium batteries in temperatures below freezing.
To search for a sensor:
Press and hold + MODE.
The sensor reception icon in the remote sensor area shows the status:
ICON | DESCRIPTION |
Main unit is searching for sensor(s). | |
A channel has been found. | |
The sensor cannot be found. |
TIP The transmission range may vary depending on many factors. You may need to experiment with various locations to get the best results.
This product is designed to synchronize its clock automatically with a clock signal.
BAR206S:
Slide EU / UK to select the signal received.
BAR206SA:
To enable / disable signal reception:
Press and hold to enable or to disable signal reception.
NOTE: Reception takes 2-10 minutes. If the signal is weak, it can take up to 24 hours to get a valid signal. If signal reception is unsuccessful, place your unit next to a window, press and hold to force another signal search.
Clock signal reception indicator:
STRONG SIGNAL | WEAK SIGNAL | NO SIGNAL |
To set the clock manually, disable the signal reception irst.
BAR206S: Time zone offset sets the clock +/- 23 hours from the received clock signal time.
BAR206SA: Select the time zone: (P) Paciic, (E) Eastern, (C) Central or (M) Mountain.
NOTE: The language options are English (E), German (D), French (F), Italian (I), and Spanish (S).
To select display mode:
Press MODE to choose between clock with seconds / weekday / calendar.
This product forecasts the next 12 to 24 hours of weather within a 30-50 km (19-31 mile) radius with a 75% accuracy.
Sunny | |
Partially Cloudy | |
Cloudy | |
Rainy | |
Snowy |
To toggle temperature unit: Press °C / °F.
To auto-scan between sensors:
Press and hold + MEM to display each sensor's data for 3 seconds.
To end press .
To toggle between current, minimum and maximum records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
If the channel 1 sensor falls between 3°C to -2°C (37°F to 28°F), LED indicator will lash, and will stop lashing once the temperature is out of this range.
Press LIGHT to activate backlight for 5 seconds.
Press RESET to return to the default settings.
NOTE: The technical speciications for this product and the contents of the user manual are subject to change without notice.
NOTE: Features and accessories will not be available in all countries. For more information, please contact your local retailer.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Download Oregon Scientific BAR206S/BAR206SA - Colour LCD Weather Station Manual
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the BAR206S that isn't answered in the manual? Leave your question here.