Specifications - Oregon Scientific RMR166 User Manual

PRECAUTIONS
This product has been designed and manufactured to give you years
of service if it is carefully handled. Please follow these few
precautions:
1. Do not immerse the unit in water.
2. Do not clean the unit with abrasive or corrosive materials. They
may scratch the plastic parts and corrode the electronic circuit.
3. Do not subject the unit to excessive force, shock, dust,
temperature or humidity, which may result in malfunction,
shortened electronic life span, damaged battery and distorted
parts.
4. Do not tamper with the unit's internal components. Doing so
will invalidate the product warranty and may cause damage to
the product. This product contains no user-serviceable parts.
5. Only use fresh batteries as specified in the user's manual. Do
not mix new and old batteries as the old ones may leak.
6. Always read the user's manual thoroughly before operating the
unit.

SPECIFICATIONS

Temperature Measurement
Main unit:
Indoor Temperature measurement
Proposed operating range:
Temperature resolution:
23.0 F to 122.0 F
(-5.0 C to +50.0 C)
0.2 F (0.1 C)
11
Remote Temperature measurement
Temperature resolution:
Remote Sensor:
Proposed operating range:
RF Transmission Frequency:
Maximum Number of
Remote Sensors:
RF Transmission Range:
Temperature sensing cycle:
Radio Controlled Clock
Time set and synchronized by Radio Signal WWVB for USA
12hr Format of hh/mm/ss format
Date Format : Month/Day format
Day-of-week Language
Choice:
Display of Four US Time Zones with Date and Day
2-minute crescendo alarm
Power
Main unit:
0.2 F (0.1 C)
-4.0 F to 140.0 F
(-20.0 C to +60.0 C)
433 MHz
3
Maximum 32.5 yards
(30 meters)
Approximately 30 seconds
English, Spanish,
or French (E, F, S)
2 pcs AA (UM-3)
alkaline battery