Nexmosphere XE Series Product Manual

Table of content
1. General
2. Product overview
3. Functionalities and API commands
3.1 Ambient light measurement
4. Installation requirements and guidelines
4.1 Connection Diagrams
4.2 Hardware integration guidelines
5. Settings
6. Quick test

1. General

The XE Ambient Light sensor measures the intensity of the light in the environment in which it is placed, facilitating
applications such as the adjustment of display brightness levels based on environmental light conditions. This document
provides explanation of the available functionalities and instructions on how to install and integrate the sensor into your
digital signage installation.
The information in this document is created for users who are familiar with the Nexmosphere API and are able to control a
basic setup with a Nexmosphere API controller. If this is not the case yet, please read the general documentation on the
Nexmosphere serial API first.

2. Product overview

Ambient light measurement
The XE Ambient Light sensor measures the intensity of ambient light and can be adhered to any object or surface. The
device consists of one small sensor that is hidden beneath a translucent diffusing cover that measures the intensity of the
incoming light (in Lux).
N e x m o s p h e r e
L e H a v r e 1 3 6
5 6 2 7 S W E i n d h o v e n • T h e N e t h e r l a n d s
XE-A20
✔
T + 3 1 4 0 2 4 0 7 0 7 0
E s u p p o r t @ n e x m o s p h e r e . c o m
XE RANGE | AMBIENT LIGHT SENSOR
XE-A20
© 2023 Nexmosphere. All rights reserved. v1.0 / 03-23
All content contained herein is subject to change without prior notice
PRODUCT MANUAL
1
1
2
2
3
3
3
4
5
1