Nexmosphere XE Series Product Manual

Table of content
1. General
2. Product overview
3. Functionalities and API commands
3.1 Temperature measurement
3.2 Humidity measurement
4. Installation requirements and guidelines
4.1 Connection diagrams
4.2 Hardware integration guidelines
5. Settings
6. Quick test

1. General

The XE Temperature sensor measures both the temperature and humidity of the environment in which it is placed, enabling
monitoring of system health and compliance conditions. This document provides explanation of the available functionalities
and instructions on how to install and integrate the sensor into your digital signage installation.
The information in this document is created for users who are familiar with the Nexmosphere API and are able to control a
basic setup with a Nexmosphere API controller. If this is not the case yet, please read the general documentation on the
Nexmosphere serial API first.

2. Product overview

The XE Temperature sensor is available in 1 model:
Temperature measurement
Humidity measurement
The XE Temperature sensor detects temperature and
humidity levels and can be adhered to any object or
surface.
The device contains a small black element that both
measures both the temperature and humidity. This sensor
is soldered on an exposed piece of the device's PCB.
N e x m o s p h e r e
L e H a v r e 1 3 6
5 6 2 7 S W E i n d h o v e n • T h e N e t h e r l a n d s
XE-T50
✔
✔
T + 3 1 4 0 2 4 0 7 0 7 0
E s u p p o r t @ n e x m o s p h e r e . c o m
XE RANGE | TEMPERATURE SENSOR
XE-T50
© 2023 Nexmosphere. All rights reserved. v1.0 / 03-16
All content contained herein is subject to change without prior notice
PRODUCT MANUAL
1
1
2
2
3
4
4
4
5
6
sensor
1