15. Replace the hard drive (see
16. Replace the media bay device (see
NOTICE:
damage to the computer.
17. Turn on the computer.
NOTE:
If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD in order to set the computer to boot from the CD
for one time only. Otherwise, you must enter the system setup program to change the default boot order.
18. Flash update the BIOS (see
19. Enter the system setup program to update the BIOS on the new system board with the computer Service Tag.
Back to Contents Page
Great user manuals database on
Replacing the Hard
Drive).
Removing and Installing Media Bay
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in
Flashing the BIOS
for more information).
UserManuals.info
Devices).