iRobot Roomba Combo i8 Owner's Manual page 13

Removing Debris from Blower
Cover
Inspect blower cover for any lint or debris built-
up, and wipe with a clean dry cloth to remove.
Cleaning the Mopping Pad
HAND WASHING
Thoroughly wash the pad with warm water.
MACHINE WASHING
Wash using the warm cycle, then air dry. Do not
tumble dry. Do not wash with delicates.
Replacing the Wick Cap
1
Remove pad plate
2
Remove the wick cap by pulling on the side
rubber tab.
3
Replace with a new wick cap, pressing
firmly into place to create a tight seal to
prevent leaking.
4
Reintall pad plate
Roomba Combo™ i8+ Owner's Guide
EN
10