hestan KRI30 Use & Care Manual page 48

OVEN CONTROLS
SELF-CLEAN MODE SELF-CLEAN MODE
NOTICE
EN
Heavy food debris should be removed before running the
self-clean cycle. Remove all oven racks, ladder racks, broiler
pans, utensils, temperature probes, etc. from the oven before
self-clean. The interior lights are disabled during this cycle.
See the CARE & MAINTENANCE section of this manual for
more details.
1. Turn BOTH the Mode Select and
Temperature knob to the SELF CLEAN
setting. The display will show "SELF
CLEAN" to indicate this setting.
2. Select the desired level of cleaning:
Speed Clean, Medium Clean, or Heavy
Clean.
See table for times.
3. Once selected, the display will show "SELF
CLEAN" and the selected cleaning level
(SPD, MED, or HVY). The door will latch
and the lock icon and the time remaining
are displayed. The oven cavity will reach a
temperature of approx. 825°F [440°C].
4. Once self clean has completed, an audible
alert will sound, the timer will show
and "COOLING" will be displayed. The
oven is now in cool-down mode. See table
for times.
46
©2021 Hestan Commercial Corporation
(CONTINUED)
5. Once the oven cavity has reached a safe
temperature (550°F / 288°C) the door will un-
latch, the lock icon will go out, and the display
prompts the user to return both oven knobs to
the OFF position.
CAUTION: The oven has not cooled-down
completely!
The oven could now be used again. However, you
must wait for the oven to cool completely to room
temperature before wiping down the interior.
NOTE:
a. If a power failure occurs while the door is
locked, it will remain locked until power is
restored and the oven temperature cools to a
safe level.
00:00
SPEED-CLEAN
SELF-CLEANING TIMES
TIME TO DOOR
HIGH-TEMP
LEVEL
UN-LATCH
CLEANING
(550° F / 290° C)
2:30
3:00
MEDIUM
3:30
HEAVY
TOTAL
TIME
:40 3:10
:40 3:40
:40 4:10