GAS CONVERSION KIT
FOR SERVICE PERSONNEL ONLY
IMPORTANT - READ ALL INSTRUCTIONS BEFORE YOU BEGIN
THE INSTRUCTIONS HEREIN MUST ONLY BE PERFORMED BY A QUALIFIED SERVICE
TECHNICIAN. THE RANGE MUST BE COMPLETELY COOL AND THE GAS SOURCE MUST
BE SHUT OFF OR REMOVED BEFORE ATTEMPTING GAS CONVERSION.
Some parts inside your range have sharp edges. Care must be taken when handling the various
components to avoid personal injury. Wear gloves when handling.
TOOLS REQUIRED:
Work gloves
Safety glasses
Phillips screwdriver
Flat-blade screwdriver
Plastic or non-marring pry tool
Pipe wrench or large slip-joint pliers
Socket wrench with 8mm socket
Open end or combination wrenches (8, 10, 12, 14mm)
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open flame.
3. Open windows and doors in the room.
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fire department.
READ THIS MANUAL CAREFULLY AND COMPLETELY BEFORE USING YOUR
RANGE TO REDUCE THE RISK OF FIRE, BURN HAZARD, OR OTHER INJURY.
KEEP THIS MANUAL FOR FUTURE REFERENCE.
Installation Instructions
Range/Rangetop
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED
EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING
PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH.
Flammable Gas - disconnect all propane or natural gas supplies to this
unit before servicing.
Electrical Parts & Components – disconnect all power supplies before
servicing.
DANGER
1. Do not store or use gasoline or
other flammable liquids or vapors
in the vicinity of this or any other
appliance.
2. An LP cylinder not connected for
use shall not be stored in the vicinity
of this or any other appliance.
©2018 Hestan Commercial Corporation
EN
EN
1