Removal And Replacement Procedures; Disassembly Sequence Chart - Compaq EX Series Maintenance & Service Manual

4
chapter
R
EMOVAL AND
This chapter provides general service information for the computer. Adherence to the
procedures and precautions described in this chapter is essential for proper service.
After completing all necessary removal and replacement procedures, run the Diagnostics
utility to verify that all components operate properly.
4.1

Disassembly Sequence Chart

Use the chart below to determine the disassembly sequence for removing components
from the computer.
4.3 Feet Installation
4.4 Cable Lock
4.5 Access Panel
4.6
4.11
4.12
4.13
4.14
4.15
4.16
4.17
4.18
R
EPLACEMENT
Front Bezel
4.7 Power Button
4.8 Subpanel and Bezel Blanks
4.9 Power Switch Assembly
4.10.1 Removing an Internal 3.5-Inch Hard Drive
4.10.2 Removing an External 5.25-Inch Drive
4.10.3 Removing an External 3.5-Inch Drive
Expansion Boards
System Memory
Graphics Cards
Processor
System Board
Lithium Battery
Chassis Fan Assembly
Power Supply
Compaq Deskpro EX and Deskpro EXS Series of Personal Computers 4-1
P
ROCEDURES