Table of Contents
Advertisement
USER MANUAL • 10 • SYSTEM WIRING INFORMATION & DIAGRAM
Use high-quality, shielded cables to connect your console, workstation or
other sources to your BMC MK III and monitoring system. Foil-shielded
cables, such as Belden 8451, 8761, or 9501 should do quite well. Other high
quality cables are available and those that incorporate better shielding will
yield an overall higher noise rejection, lowering your systems susceptibility
to external interference. Another important tip to keep in mind when wiring
your system is to route all line level cables away from the AC and other
power sources, this will reduce the probability of having AC hum emanating
from your monitoring system.
5.1 Channel Output From Console or Workstation
BMC MK III
LS
5.1 Channel Monitoring System
User Manual • System Wiring Information & Diagram • Page 11
bass management controller
MK III
5.1 Channel Output From
the BMC going to the monitoring
system.
NOTE: Connect the SUB output to the
DIRECT input on the subwoofer.
SUB
C
L
R
RS
Advertisement
Table of Contents
