Table of Contents
Advertisement
1
Information and general warnings
1.1
General warnings
Disconnect all power supplies before attempting
installation
Installation must only be conducted by qualified and
Installation must only be conducted by qualified and
skilled personnel in compliance with these instruc-
skilled personnel in compliance with these instruc-
tions and all local and national codes
tions and all local and national codes
Ensure adequate work space before attempting
Ensure adequate work space before attempting
installation
installation
All accessory kits must be inspected for con-tents
All accessory kits must be inspected for con-tents
and integrity. If any components appear damaged
and integrity. If any components appear damaged
DO NOT attempt installation; contact your supplier
DO NOT attempt installation; contact your supplier
After all operations are completed in compliance with
After all operations are completed in compliance with
these instructions; remount the cover and reconnect
these instructions; remount the cover and reconnect
all safety devices before operating
all safety devices before operating
Failure to follows these instruction could result in
Failure to follows these instruction could result in
unsafe operation.
unsafe operation.
1.2
General information
Please note, this manual is only for burner display control.
See Massimo Boiler Control manual for panel control
system.
The multi-function display for LMV3x/5x is a common
component for 3 systems: Solo, Piccolo and Massimo.
The Solo is a system that provides easy access to
operators and BMS systems and burner functions. The
burner is equipped with high definition 4.3" color HMI
screen, delivering a modern and clean overview of the
system in a snapshot.
The Piccolo is a 2 boiler lead/lag system that only needs
the burners to be equipped with the multi-function displays
and includes many functions already present in Solo.
The Massimo is a full boiler room control system and any
burner equipped with a multi-function display can commu-
nicate with it and participate on the up to 8 boilers lead/lag
system.
1.3
Other relevant documents
Massimo Boiler Control System manual (Main control panel
for Massimo).
Information and general warnings
3
Please note that in manual contains fhe following legend to
help navigate what functionality is compatible with the 4
modes of control:
Solo
Massimo
Piccolo
Remote Modulation
The Mulit-Function Burner Display Control is not a safety
control. It does not interfere with any safety limitation set on
the burner and boiler.
This manual may be updated without notice of change.
0214190 - 01/2022
Advertisement
Table of Contents
