Multi-Function Display Version Update; Unpacking The Software; Burner Hmi Update - Riello LMV3 Use And Instruction Manual

6

Multi-function display version update

Introduction
The multi-function display is designed and programmed
inhouse.Continuous mprovments to are being made to the
system. For latest version please request from Riello for
newest version (if available).
6.1

Unpacking the software

1 Unzip "vX.XX_loader" into a separate folder you
desire
These are the contents of the folder after you have unzipped
them.
2 Prepare one USB drive, formatted using FAT32 file
system
3 For the burner screen update (Solo, Piccolo, Mas-
simo), open the folder "burner hmi" indicated as selection B
6.2

Burner HMI update

1 Power OFF the burner screen
2 Insert USB stick with "HMI_AutoUP" from
B
3 Power up the screen and wait for the full boot up
4 Press the button marked as "SYSTEM" on the back
of the screen until you hear a single beep
Massimo version update
This is the content of the folder "burner hmi" after you open
it.
4
directory of and empty USB drive.
5
selection
27
Copy then this "HMI_AutoUP" folder to the root
After this screen opens go to "System Setting"
0214190 - 01/2022