Table of Contents
Advertisement
Massimo
Solo
Piccolo
User interface
3
The MFBD has features common to different modes. To
keep it simple please use the following legend, as it applies
to relevant functionality:
3.1
Burner view
The following will be dis-
The following will be dis-
played depending on the
played depending on the
mode selected:
mode selected:
Solo - Custom IP option for
Solo
connection to Modbus TCP
Piccolo - Boiler1/2
Piccolo
Massimo
Massimo - Boiler
1/2/3/4/5/6/7/8
Refer to 3.2
Refer to 3.15
The burner screen gives an over-all general picture of the
what is happening with the burner.
Summary:
► Viewable mode selection: ("Manual On", "Manual Off",
"Remote Modulation", "Solo", "Picollo", "Massimo")
► Date/time
► Steam/ hot water
3.2
Control
Refer to 3.4.3
Local/remote setpoint available. Local setpoints include:
► Switch for selectable setpoint source (local/remote)
► Outside Reset Setpoint
Remote setpoints include:
► Bus
► 0 - 10 VDC, 4-20ma
User interface
► Return temperature (if required - Solo or Massimo)
► Alarm indication
► Process value
► Setpoint
► Firing Rate
► Boiler number (Only in Piccolo and Massimo)
► Communication failure
LMV3/LMV5 flamesafeguard selection
Control mode selection: ("Manual On", "Manual Off", "Re-
mote Modulation", "Solo", "Picollo", "Massimo")
Burner information
System Configuration (main menu)
13
Adjust date/time
by touching
Refer to 3.16
Refer to 3.3
Refer to 3.4
Refer to 3.16
0214190 - 01/2022
Advertisement
Table of Contents
