Unpacking The Autoloader - HP StorageWorks vs80 User Manual

Unpacking the Autoloader

Chapter 1
Before you begin, clear a desk or table so that you can unpack the autoloader.
You also need to select an open 2U computer rack location or choose a
desktop location near the server that is to be the host for the autoloader.
Caution If the room in which you are working differs from the
temperature in which the autoloader was shipped or stored by
30° F (15° C) or more, let the autoloader acclimate to the
surrounding environment for at least 12 hours before opening
the shipping carton.
Unpack and inspect the autoloader for shipping damage by doing the
following:
1. Clear a table or desk so that you have room to unpack the autoloader.
2. Inspect the shipping box for damage. If you notice any damage, report it
to the shipping company immediately.
3. Open the shipping box and remove the accessories package. Set the
accessories package aside for now.
4. Lift the autoloader and padding out of the box and place it on the work
surface, top facing up.
Caution Do not set the autoloader on either end or sides.
5. Carefully remove the shipping padding from the left and right sides of the
autoloader. Then remove the bag from the autoloader.
Note Save the packing materials in case you need to move or ship the
autoloader in the future.
Installing the Autoloader 13