Table of Contents
Advertisement
Quick Links
230V 450mm
HEDGE TRIMMER
03704
Stock No.03707
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Draper Storm Force 03704
Summary of Contents for Draper Storm Force 03704
- Page 1 All photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
-
Page 2: Title Page
Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact. -
Page 3: Table Of Contents
CONTENTS TABLE OF CONTENTS TITLE PAGE INTRODUCTION ......................2 REVISIONS ........................2 UNDERSTANDING THIS MANUALS SAFETY CONTENT ......... 2 COPYRIGHT © NOTICE ....................2 CONTENTS TABLE OF CONTENTS ....................3 WARRANTY WARRANTY ......................... 4 INTRODUCTION SCOPE ......................... 5 SPECIFICATION ......................5 HANDLING AND STORAGE .................. -
Page 4: Warranty 3.1 Warranty
This warranty applies in lieu of any other warranty expressed or implied and variations of its terms are not authorised. Your Draper warranty is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the warranty period. -
Page 5: Introduction
INTRODUCTION SCOPE These Draper Tools hedge trimmers are for the cutting and trimming of hedges, bushes and ornamental shrubs. All other applications are considered misuse. This product is intended for domestic and infrequent light trade use only. Any application other than that it was intended for, is considered misuse. -
Page 6: Health And Safety Information
HEALTH AND SAFETY INFORMATION GENERAL SAFETY INSTRUCTIONS FOR POWER TOOL USE Warning! Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. -
Page 7: Specific Safety Instructions For 230V Hedge Trimmers
HEALTH AND SAFETY INFORMATION f) Dress properly. Do not wear loose clothing or jewellery. Keep your hair and clothing away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. g) If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. -
Page 8: Residual Risk
HEALTH AND SAFETY INFORMATION Warning! This machine can cause serious injuries. Read the instructions carefully for the correct handling, preparation, maintenance, starting and stopping of the machine. Be familiar with all controls and the proper use of the machine. − Never allow children to use the machine. −... - Page 9 HEALTH AND SAFETY INFORMATION If an extension lead is required, use an approved and compatible lead rated for this appliance. Follow all the instructions supplied with the extension lead. Double insulated : This product requires no earth connection as supplementary insulation is †...
-
Page 10: Technical Description
TECHNICAL DESCRIPTION IDENTIFICATION (1) Cutting blade. (6) Rear handle (Stock No.03705). (2) Safety guard. (7) Cable restraint. (3) Safety switch. (8) Power cable with plug. (4) Auxiliary handle. (9) Blade guard. (5) ON/OFF trigger switch. Note: For details of our full range of accessories and consumables, please visit drapertools.com –... -
Page 11: Unpacking And Checking
Lay the contents out and check them against the parts shown below. If any part is damaged or missing, please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the product. -
Page 12: Operation
(R.C.D FIG. – these can be purchased separately from all Draper Tools stockists). The front safety switch (3) must be operated first. The trigger (5) can then be pulled. When either the trigger (5) or front switch (3) are released the hedge trimmer will stop working and the safety brake will operate, stopping the blade. -
Page 13: Hedge Cutting Techniques
OPERATION HEDGE CUTTING TECHNIQUES Vertical Cutting – Fig.5 The best practice is to cut the front and side of a hedge first, before finishing with the top. – Set the cutting head straight. – Make large sweeping arcs with the cutting head, using both sides of the blade to trim material from the hedge. -
Page 14: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING CLEANING AND LUBRICATION – FIGS. 7 – 8 Warning! Remove the plug from the socket before carrying out adjustment, servicing or maintenance. After every use, before storing the hedge trimmer away the following should be carried out. −... -
Page 15: Servicing
SERVICING There are no parts inside the equipment which require additional maintenance. For service or repair, contact Draper or your nearest authorised service agent. REPLACING THE POWER CABLE If the power cable for this equipment is damaged, it must be replaced by the manufacturer or its aftersales service or similarly trained personnel to avoid danger. -
Page 16: Disposal
10. DISPOSAL 10.1 DISPOSAL – At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. – Contact your local authority for details of collection schemes in your area. In all circumstances: •... -
Page 17: Explanation Of Symbols
11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS Class II construction Read the instruction manual. (Double insulated). WEEE – Wear face mask, ear defenders Waste Electrical & Electronic Equipment. and safety glasses. Do not dispose of Waste Electrical & Electronic Equipment in with domestic rubbish. - Page 18 NOTES – 18 –...
- Page 19 ©Published by Draper Tools Limited. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.
Need help?
Do you have a question about the Storm Force 03704 and is the answer not in the manual?
Questions and answers