Draper GT530B User Manual
  1. Manuals
  2. Brands
  3. Draper Manuals
  4. Trimmer
  5. GT530B
  6. User manual

Draper GT530B User Manual

500w
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE
SAFE AND EFFECTIVE USE OF THIS PRODUCT.
INSTRUCTIONS
These instructions accompanying the product are the original instructions. This document is part of the product, keep
it for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed,
and contains all the necessary information to ensure its correct and safe use. By following all the general safety
instructions contained in this manual, it will ensure both product and operator safety, together with longer life of the
product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the
product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
500W
GRASS
TRIMMER
45927

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the GT530B and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Draper GT530B

Summary of Contents for Draper GT530B

  • Page 1 AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.

  • Page 2: Title Page

    Commercial copying, redistribution, hiring or lending is prohibited. No part of this publication may be stored in a retrieval system or transmitted in any other form or means without written permission from Draper Tools Limited. In all cases this copyright notice must remain intact.

  • Page 3: Table Of Contents

    CONTENTS 2.1 CONTENTS Page content Page TITLE PAGE INTRODUCTION ......................2 REVISION HISTORY ....................2 UNDERSTANDING THIS MANUAL ................2 COPYRIGHT NOTICE ....................2 CONTENTS CONTENTS ........................3 GUARANTEE GUARANTEE........................ 4 INTRODUCTION SCOPE.......................... 5 SPECIFICATION......................5 HANDLING & STORAGE....................5 HEALTH &...

  • Page 4: Guarantee

    This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorised. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the guarantee period.

  • Page 5: Introduction

    Any other application is considered mis-use. 4.2 SPECIFICATION Stock no..........................45927 Part no.......................... GT530B Rated voltage ......................230V~50Hz Rated input ......................... 500W Revolutions per minute (no load).................. 9600min Cutting diameter Ø...

  • Page 6: Health & Safety Information

    HEALTH & SAFETY INFORMATION Do not overreach. Keep proper footing and balance at 5.1 GENERAL SAFETY INSTRUCTIONS all times. This enables better control of the power tool General Power Tools Safety Warnings in unexpected situations. WARNING: Read all instructions. Failure to follow Dress properly.

  • Page 7: Additional Safety Instructions

    HEALTH & SAFETY INFORMATION 5.2 ADDITIONAL SAFETY INSTRUCTIONS 2) Service WARNING: When using the machine the safety rules a) After use, disconnect the machine from the mains must be followed. For your own safety and that of and check for damage. bystanders please read these instructions before b) When not in use store the machine out of reach of operating the machine.

  • Page 8: Caution: Risk Of Electric Shock. Do Not Open

    HEALTH & SAFETY INFORMATION 5.3 CAUTION: RISK OF ELECTRIC SHOCK. DO NOT OPEN. Caution: Risk of electric shock. Do not open. This appliance is supplied with a moulded 3 pin mains plug for your safety. The value of the fuse fitted is marked on the pin face of the plug.

  • Page 9: Technical Description

    TECHNICAL DESCRIPTION 6.1 IDENTIFICATION Double line spool Trigger safety lock Guide wheel On/off trigger switch Flower guard Cable restraint Line length trimming blade Cable and plug Telescopic tube adjustment Foot latch for head angle adjustment Handle rotation locking catch Guard Auxiliary handle lock knob Filament line Auxiliary handle...

  • Page 10: Unpacking & Checking 7.1 Packaging

    Lay the contents out and check them against the parts shown below. If any part is damaged or missing; please contact the Draper Help Line (the telephone number appears on the Title page) and do not attempt to use the tool.

  • Page 11: Assembly

    ASSEMBLY 8.1 ATTACH AUXILIARY HANDLE ASSEMBLY- FIGS. 1 - 2 FIG.1 FIG.2 8.2 ATTACH GUARD ASSEMBLY - FIGS. 3 - 4 FIG.4 FIG.3...

  • Page 12: Auxiliary Handle

    ASSEMBLY 8.3 AUXILIARY HANDLE - FIG. 5 8.4 SHAFT LENGTH - FIG. 6 FIG.6 A + B FIG.5 8.5 HEAD ROTATION - FIG. 7 FIG.7 A+180° 8.6 HEAD ANGLE - FIG. 8 180° 180° A=1/2/3. FIG.8...

  • Page 13: Operating Instructions

    Always keep bystanders away. Remove the plug from the socket before carrying out adjustment, servicing or maintenance. 9.1 ON/OFF TRIGGER SWITCH - FIG. 9 FIG.9 Draper Stock No.69307 It is highly recommended that this machine is used in conjunction with an...

  • Page 14: Flower Guard

    OPERATING INSTRUCTIONS 9.2 FLOWER GUARD - FIGS. 10 - 11 FIG.10 FIG.11 9.3 GUIDE WHEEL FOR EDGING - FIGS. 12 - 13 FIG.12 FIG.13...

  • Page 15: Cutting Head

    OPERATING INSTRUCTIONS 9.4 CUTTING HEAD - FIGS. 14 - 16 FIG.14 Check the nylon line regularly, when the trimming performance decreases adjust the line length. Remove the plug from the power supply and turn the machine over. Press button completely. Pull the nylon line one stage. Repeat this for the second line.

  • Page 16: Maintenance And Parts Replacement

    10. MAINTENANCE & PARTS REPLACEMENT 10.1 MAINTENANCE & PARTS REPLACEMENT Regular inspection and cleaning reduces the necessity for maintenance operations and will keep your machine in good working condition. For this reason avoid the air inlets from becoming blocked. After use disconnect the machine from the power supply and clean the ventilation slots. Clean the line length trimming blade of grass to ensure a satisfactory cut is maintained.

  • Page 17: Explanation Of Symbols

    11. EXPLANATION OF SYMBOLS 11.1 EXPLANATION OF SYMBOLS WEEE Keep hands away Do not dispose of Waste Electrical from blades and & Electronic Equipment in with moving parts. domestic rubbish Remove plug before Class II construction maintenance. (Double insulated) Wear protective gloves. Warning! Wear suitable eye/face protection.

  • Page 18: Disposal

    12. DISPOSAL 12.1 DISPOSAL - At the end of the machine’s working life, or when it can no longer be repaired, ensure that it is disposed of according to national regulations. - Contact your local authority for details of collection schemes in your area. In all circumstances: •...
  • Page 19 NOTES...
  • Page 20 - Sales Desk: (023) 8049 4333 - General Enquiries: (023) 8026 6355 - Service/Warranty Repair Agent For aftersales servicing or warranty repairs, please contact the Draper Tools Help Line for details of an agent in your local area. YOUR DRAPER STOCKIST RDLJ1216...

Table of Contents