Draper HT4055 Instructions

HEDGE TRIMMERS

STOCK No.56480

PART No.HT4040

56481

HT4055

• INSTRUCTIONS •

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE

SAFE AND EFFECTIVE USE OF THIS TOOL.

01/99

SPECIFICATION

Whilst every effort has been made to ensure that the information given in this manual is correct at

the time of going to print, the Draper Tools policy of continuous improvement determines the right

to change specification without notice.

STOCK No. . . . . . . . . . . . . . . . . . . . . . . . . . . 56480 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56481

PART No. . . . . . . . . . . . . . . . . . . . . . . . . . . . HT4040 . . . . . . . . . . . . . . . . . . . . . . . . . . . HT4055

VOLTAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230V

POWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400W . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400W

BLADE LENGTH . . . . . . . . . . . . . . . . . . . . . 400mm. . . . . . . . . . . . . . . . . . . . . . . . . . . . 550mm

MAX. CUTTING THICKNESS . . . . . . . . . . . . 14mm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14mm

CUTTING MOVEMENT . . . . . . . . . . . . . . . . . 3000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3000

QUICK STOP BLADE BRAKE . . . . . . . . . . . <0.5sec.. . . . . . . . . . . . . . . . . . . . . . . . . . . <0.5sec

WEIGHT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5kg. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.9kg.

SOUND POWER LEVEL . . . . . . . . . . . . . . . . 83dbA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83dbA

SOUND PRESSURE LEVEL . . . . . . . . . . . . . . 97dbA . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97dbA

VIBRATION LEVEL . . . . . . . . . . . . . . . . . . . 4.2m/s

. . . . . . . . . . . . . . . . . . . . . . . . . . . 4.2m/s

Table of Contents

Do you have a question about the HT4055 and is the answer not in the manual?

Page 1 PART No......HT4040 ...
Page 2 This guarantee applies in lieu of any other guarantee expressed or implied and variations of its terms are not authorized. Your Draper guarantee is not effective unless you can produce upon request a dated receipt or invoice to verify your proof of purchase within the 12 month period.
Page 3 ©Published by Draper Tools Ltd. No part of this publication may be reproduced, stored in a retrieval system or transmitted in any form or by any means, electronic, mechanical photocopying, recording or otherwise without prior permission in writing from Draper Tools Ltd.

Ht40405648056481