Table of Contents
Advertisement
Installation
N
N
ote
ote
Contact the nearest
service center if the
projector displays
these symptoms.
See pages
52-53 for more
information.
14
14
Powering off the Projector
1. Press the "POWER" button to turn off the projector lamp.
The following message will be displayed on the screen.
Press the "POWER" button again to confirm, otherwise the
message will disappear after 15 seconds.
When you press the "POWER" button a second time, the
system will show the countdown timer on the screen.
2. The cooling fans continue to operate for about 10 seconds
for cooling cycle. When the Power LED turns Red, the
projector has entered standby mode.
If you wish to turn the projector back on, you must wait until
the projector has completed the cooling cycle and has en-
tered standby mode. Once in standby mode, simply press
"POWER" button to restart the projector.
3. Disconnect the power cord from the electrical outlet and the
projector.
4. Do not turn on the projector immediately following a power
off procedure.
Warning Indicator
When the "LAMP" indicator lights red ("POWER" indicator
flashes red), the projector will automatically shut down.
Please call your nearest service center for assistance.
When the "TEMP" indicator lights red ("POWER" indicator
flashes red), it indicates the projector has overheated. The
projector will shut down automatically.
Under normal conditions, the projector can be switched on
again after it has cooled down.
When the "TEMP" indicator flashes red ("POWER" indicator
flashes red), it indicates the fan has failed.
Advertisement
Table of Contents
