Pet Tool Turbo Brush; Crevice/Dusting Combo Tool; Upholstery Tool; Maintenance And Care - Simplicity S65D Owner's Manual

ATTACHMENT CLEANING
The vacuum is equipped with a pet
tool turbo brush, crevice/dusting combo
tool, upholstery tool and angle adapter.
Attach any of the tools onto the vacuum
or the end of the wand (Fig. 1).

Pet Tool Turbo Brush

Ideal for removing pet hair from
upholstery and vehicles (Fig. 2).
NOTE: Do not use pet tool on pets.
C revice/Dusting Combo Tool
Ideal for tight places, between seat
cushions or corners. Remove the
attachment to use as a crevice tool.
Add the attachment with brushes
exposed to use as a dusting brush.
Add the attachment with felt exposed
to use as upholstery tool (Fig. 3).

Upholstery Tool

Ideal for soft surfaces and furniture
(Fig. 4).
Fig. 4
12
Fig. 1
Fig. 2
Fig. 3
WARNING: Always turn off
the vacuum and remove the
battery before performing any
service.

Emptying the Dust Cup

1. Press the wand release button and
remove the wand from the vacuum.
2. Hold the dust cup over a waste bin.
3. Push the dust cup release button to
release the bottom of the dust cup
(Fig. 1). The base will drop down and
the debris will fall into the waste bin.
4. Shake the dust cup to release any
debris that might be inside the
dust cup.
5. When the dust cup is empty of debris,
firmly push the base onto the dust
cup until it clicks and is fully latched
(Fig. 2).
Removing and Replacing the
Dust Cup (for Cleaning)
1. Turn the dust cup clockwise to line-
up the arrows and remove from the
vacuum (Fig. 3).
2. Turn the internal cylinder clockwise to
remove from the vacuum (Fig. 4).
3. Rinse the dust cup and internal
cylinder with warm water and allow to
dry thoroughly before re-attaching to
the vacuum.
4. Replace the internal cylinder and dust
cup onto the vacuum.

MAINTENANCE AND CARE

Fig. 1
Fig. 2
Fig. 3
Fig. 4
13