CONTENTS Getting Started Important Safety Instructions Description of the Vacuum Assembling the Vacuum Attaching the Wand and Floor Nozzles Installing/Removing/Charging the Battery Storing the Vacuum Operating the Vacuum On/Off Switch 2-Speed Switch Attachment Cleaning Carpet/Bare Floor Nozzle Pet Tool Turbo Brush Crevice/Dusting Combo Tool Upholstery Tool Maintenance and Care...
Page 3
13. DO NOT pick up or use near flammable cleaner Product Code S65D-2 fire. or combustible fluids, hazardous dusts or Model: S65D-2 Battery Voltage 22.2 This machine must only be used for the vapours. This machine is in conformity with the manufacturer’s approved application as...
Page 4
Simplicity parts. charger may result in no charging and/or CAUTION Risk electric shock STORAGE 11. Defects in other than genuine Simplicity unsafe conditions. parts, repairs, modifications Always switch off the machine after use. 42. DO NOT expose to heat above 100C adjustments performed by other than an 30.
DESCRIPTION OF THE VACUUM ASSEMBLING THE VACUUM Attaching the Wand and Floor Nozzles 1 On/Off Switch NOTE: Do not operate the vacuum until it is completely assembled. 2 2-Speed Switch The vacuum, floor nozzles, wand and 3 Filter Release Knob accessories are packed separately.
ASSEMBLING THE VACUUM ASSEMBLING THE VACUUM WARNING: The S65 battery included Storing the Vacuum can only be used with the S65 model as The vacuum can be conveniently stored intended. on the Storage/Charging Station, as well as the wand and cleaning tools when not Installing the Battery in use (Fig.
OPERATING THE VACUUM ATTACHMENT CLEANING On/Off Switch Floor Nozzles To turn vacuum on or off, pull the trigger Floor nozzles can be attached to the switch inside the handle (Fig. 1). end of the wand for floor cleaning or directly to the vacuum to clean stairs 2-Speed Switch or small spaces.
MAINTENANCE AND CARE ATTACHMENT CLEANING WARNING: Always turn off The vacuum is equipped with a pet tool turbo brush, crevice/dusting combo the vacuum and remove the tool, upholstery tool and angle adapter. battery before performing any Attach any of the tools onto the vacuum service.
MAINTENANCE AND CARE MAINTENANCE AND CARE WARNING: Always turn off Removing the Brushroll the vacuum and remove the WARNING: Always turn off battery before performing any the vacuum and remove the service. battery before performing any service. Replacing the Filter 1.
• Empty dust cup frequently and clean or replace the filter routinely. • Always use genuine filters and parts, as use of other products may result in poor cleaning or filtration performance. Simplicity Vacuum filtration products are designed for maximum performance.
Need help?
Do you have a question about the S65D and is the answer not in the manual?
Questions and answers