Pre-Motor Filter Replacement - Simplicity Scout Plus Owner's Manual

when being inserted into the dust bag
bracket.
Note: The dust bag has been designed
with a seal to prevent dust and debris
from escaping when the dust bag is
removed from the cleaner.
• Gently close the cover, you will hear a
'click' when closed properly.
Note: Please ensure that the dust bag is
fully inserted into the dust bag bracket
before closing the cover to avoid dust
leaking from the dust bag.

Pre-Motor Filter Replacement

IMPORTANT! Ensure the cleaner is
disconnected from the power supply
before performing any maintenance
procedures.
The pre-motor filter should be replaced
every six months or when it becomes
visibly dirty. Always operate the cleaner
with clean filters; otherwise, there may
be a reduction in the suction power or
motor damage may result.
Note: Do not use a washing machine to
wash the filter or a hair drier to dry the
filter.
• Pull out the filter bracket assembly.
• Replace with a new filter.
(Fig 19)
MAINTENANCE
(Fig 19)
14