Initial Settings; Video Channel Set - JVC G-code ShowView HR-S5900AM Instructions Manual

6
EN
V ideo
Cha nnel Set
Video Channel (RF Output Channel) is the channel on which
your TV receives picture and sound signals from the video
recorder through the RF cable.
TEST SIGN AL
To view picture signals from the video recorder, set
your TV to the Video Channel.
PR +/ –
O K
The channel on which the screen to
the left appear clearly in step
your Video Channel.
If you have connected the video recorder to your TV
via the provided RF cable only (RF connection) – Go to
"W ith RF Connection" below.
If you have connected the video recorder to your TV
via both the provided RF cable and an AV cable (AV
connection), or via the provided RF cable, the provided
S-Video cable and an audio cable (S-VID EO connec-
tion) – Go to "W ith AV Connection or S-VID EO
Connection" on next page.
W ith RF Connection
IM PO RTAN T:
Before performing the following steps, make sure the
recorder's power is off and there is no cassette inserted in
the recorder.
ACCESS VIDEO CHAN N EL
SET MO DE
1
Hold down
display panel shows the following.
SELECT TV SYSTEM
2
Press
the system of TV being used (refer to the table below).
New Zealand, Kuwait, U.A.E.,
Indonesia, Singapore, Thailand,
Malaysia, Iran, Saudi Arabia,
Egypt, Morocco, Lebanon, Iraq
China, Mongolia, Russia
Hong Kong
Australia
U.S.A., Japan, S.Korea, Taiwan
*HR-S5900AM only
is
3
IN ITIAL SETTIN GS
on the recorder until the
STO P/ EJECT
to set appropriate TV system that matches
PR +/ –
1 : B/G 2 : D/K 3 : I
M ajor Countries / Areas
4 : H 5 : M*
TV System
B/G
D/K
I
H
M*