JVC G-code ShowView HR-S5900AM Instructions Manual page 33

SET CHAN N EL PO SITIO N
4
Turn the JOG dial to the left or right.
● You can cancel the setting at any time by pressing
and holding the JOG dial for more than 3 seconds.
Repeat from the step 2.
EN GAGE RECO RDER' S
TIMER MO DE
5
Press 24H EXPRESS ‰ ‰ ‰ ‰ ‰ .
The recorder turns off automatically and "‰" appears
on the display panel.
N O TES:
● If "Err" appears on the display panel, repeat the steps again.
● When a menu screen is shown, you cannot use 24H Express
Timer programming function. Press MENU to return to normal
screen, and try again.
● You can use 24H Express Timer programming function also
when the recorder is turned off.
● For 24H Express Timer programming function, the program
overlap warning display does not appear even if some
programs overlap each other.
● In case of a power failure after programming, the recorder's
memory backup keeps your selections (if the lithium battery is
not exhausted).
33
EN