Express Timer Programming - JVC G-code ShowView HR-S5900AM Instructions Manual

30
EN
Ex press Timer
Progra m m ing
Remember, the clock must be set before you can
programme the timer (
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Turn on the TV and select the VIDEO channel (or AV mode).
● Select the appropriate colour system (
START+/–
PROG
pg. 12).
pg. 52).
PR +/–
TIMER RECORDING (cont.)
ACCESS G-CO DE SCREEN
1
Press PROG.
ACCESS PRO GRAMME
SCREEN
2
Press START +/–. (If you're
just starting out, "P1"
appears.)
EN TER PRO GRAMME
ST ART TIME
3
Press START +/– to enter
the time you want
recording to start.
● Press and hold START
+/– to move in 30-
minute increments, or
press and release
repeatedly to move 1
minute at a time.
EN TER PRO GRAMME STO P
TIME
4
Press STOP +/– to enter the time you want recording to
stop.
● Press and hold STOP +/– to move in 30-minute
increments, or press and release repeatedly to move 1
minute at a time.
EN TER PRO GRAMME DATE
5
Press DATE +/–. (The current date appears on screen.
The date you enter appears in its place.)
EN TER CHAN N EL
PO SITIO N
6
Press PR +/–.
– P1 –
START STOP
–:– – –:– –
=
SP
DATE TV PROG
– –. – – – –
[+/–] = [1]: TITLE
[PROG] : EXIT
– P1 –
START STOP
21:00 –:– –
=
SP
DATE TV PROG
– –. – – – –
[+/–] = [1]: TITLE
[PROG] : EXIT
– P1 –
START STOP
21:00 22:00
=
SP
DATE TV PROG
25. 12 1
[+/–] = [1]: TITLE
[PROG] : EXIT