Express Timer Programming - JVC G-code ShowView HR-S5900AM Instructions Manual

32
EN
2 4 H Ex press
Tim er
Progra m m ing
Remember, the clock must be set before you can
programme the timer (
Before performing the following steps:
● Insert a cassette with the safety tab in place. The recorder
will come on automatically.
● Select the appropriate colour system (
pg. 12).
pg. 52).
TIMER RECORDING (cont.)
You can programme a timer recording that starts within
24 hours.
ACCESS 24HR EXPRESS
TIMER PRO GRAMME
DISPLAY
1
Push 24H EXPRESS ‰ ‰ ‰ ‰ ‰ . "
on the display panel.
Programme start time indicator
SET PRO GRAMME ST ART
TIME
2
Turn the JOG dial to the left or right. Then, push the
JOG dial. " " and start time start blinking on the
display panel.
Programme start time indicator
● One click stop of the JOG dial changes the time in 5-
minute intervals.
SET PRO GRAMME STO P
TIME
3
Turn the JOG dial to the left or right. Then, push the
JOG dial and channel number will start blinking.
Programme stop time indicator
One click stop of the JOG dial changes the time in 5-
●
minute intervals.
" and start time start blinking