Siemens SIMATIC NET S7-CPs Configuring And Installing page 290

C References and Literature
Locating Siemens literature
The order numbers for Siemens documentation can be found in the catalogs
"SIMATIC NET Industrial Communication, catalog IK PI" and "SIMATIC Products
for Totally Integrated Automation and Micro Automation, catalog ST 70".
You can obtain these catalogs and any further information you require from your
local SIEMENS office or national head office.
Some of the documents listed here are also in the SIMATIC NET Manual
Collection supplied with every S7-CP.
Many SIMATIC NET manuals are available on the Internet pages of Siemens
Customer Support for Automation:
http://support.automation.siemens.com/WW/view/de
Enter the ID of the relevant manual as a search key. The ID is shown below the
literature name in brackets.
Manuals that are installed with the online documentation of the STEP 7 installation
on your PG/PC, can be selected from the Start menu (Start > SIMATIC >
Documentation).
You fill find a overview of the SIMATIC documentation at:
http://www.automation.siemens.com/simatic/portal/html_76/techdoku.htm
On configuration, commissioning and use of the CP
/1/ SIMATIC NET
S7 CPs for Industrial Ethernet − device documentation Part B
Manual
Siemens AG
(manual for each CP in the SIMATIC NET Manual Collection)
/2/ SIMATIC NET
Version history / current downloads for SIMATIC NET S7 CPs
Siemens AG
(SIMATIC NET Manual Collection)
http://support.automation.siemens.com/WW/view/en/9836605
A−290
S7-CPs for Industrial Ethernet Configuring and Commissioning
Release 07/2010
C79000−G8976−C182−10