Springfree O200 Assembly & Installation page 6

ASSEMBLY
5
Locate the green tag on the bottom edge of the net and match it with any green
sticker on your trampoline frame.
Holding the net so that the green
inside the frame as shown. DO NOT let go of the green
Put a mat rod through the hole to the immediate le of the green
and then into the mat rod socket next to the green
Then, working carefully around the frame, insert the remaining mat rods through the
net holes and into the corresponding mat rod socket. When finished, the net should
be stretched tightly around the OUTSIDE of the frame.
Be sure that the mat rods are seated down to the bottom of each mat rod socket.
NOTE - As you install the mat rods into the mat rod sockets the net will
become tight against the frame. Handle the net with care and be sure that it
does not get caught or it may tear.
NOTE - The net must be installed BEFORE installing the mat.
8
tag is facing you, gently place the rest of the net
tag.
tag in the net
sticker.
ASSEMBLY
6a
ROD INSTALLATION
TECHNIQUE
Outside Person:
Hold the mat rod near the ball end
with your palm facing up and bend
your arm at a right angle as shown.
Hold the mat edge with your other
hand.
Pull your elbow into your hip and
always push using your body weight.
Please read before continuing. DO NOT
INSTALL any of the mat rods yet.
Inside Person:
Hold the mat rod with both hands as
shown to assist the outside person.
9