NEC DTERM i Series User Manual page 10

S-SPD (Speed Calling – System)
Allows a station user to call certain frequently
dialed numbers using fewer digits (abbreviated
call codes) than would normally be required.
CAS (CAS – Switch Hook Flash)
Allows the user to send a switchhook flash while
on an outside trunk.
UCDBO (UCD Busy Out)
Allows a station user to block UCD calls and to
cancel Busy Out.
FLASH (Flash)
Provides the station with a switchhook flash.
FDN (Call Forward – No Answer)
Permits a call to an unanswered station to be
forwarded to a predesignated station if the
called station does not answer within a
predetermined period of time.
C-RPT (ISDN Malicious Call Trace)
Allows the user to initiate a Call Trace on ISDN
calls only.
G-SPD (Speed Calling – Group)
Allows a station user to share a set of common
Speed Calling numbers with other station users
in the group.
P-RLS (Privacy Release)
Allows another station to depress a busy line
button and enter the conversation of a station
already engaged in communication.
DND (Do Not Disturb)
Allows a station user to deny access to the
station line for incoming calls.
MIC (Microphone On/Off)
Allows the user to turn the microphone on
and off for use with the speakerphone.
8