NEC DTERM i Series User Manual page 9

E-OVR (Executive Override)
Enables selected station users, upon
encountering a busy condition at an internal
station, to bridge into the busy connection.
CW (Call Waiting)
Enables a busy station to receive a second
incoming call. A camp-on indication tone is sent
to the busy station, and the user can use a
switchhook flash to answer the second call.
CB (Call Back)
Provides the ability for a calling station to set a
CALL BACK. The calling station will be rung as
soon as the busy station becomes available.
S&R (Save and Repeat)
Allows a station to save a specific dialed number
and then redial that number later.
MWSET (Message Waiting – Set)
Allows a station to set a Message Waiting
indication or lamp.
HOLD (Call Hold)
Permits a station user to hold a call in progress
and to return to the previously held call.
MWOFF (Message Waiting – Cancel)
Allows a station to cancel a Message Waiting
indication or lamp.
PICK (Call Pickup – Group)
Permits a station user to answer any call directed
to other lines in the user' s preset Call Pickup
Group.
CONF (Three-way Calling)
Enables a station user to establish a three-way
conference by connecting an additional party to
an already existing conversation.
VOICE (Voice Call)
Enables the user to make a call to the called
party' s built-in speaker. If the called party' s MIC
is on, the called party can converse hands-free.
7