Advertisement
NOTE:
The switch models that the LSWM2XGT2PM interface card are
applicable to may change over time. For the most recent list of
applicable switch models, contact HPE Support or marketing
staff.
1/10GBase-T Ethernet ports
Table 1 1/10GBase-T Ethernet port specifications
Item
Connector type
Port standard
Transmission medium
and max transmission
distance
Compliance standard
LEDs
Each 1/10GBase-T port on the LSWM2XGT2PM interface card has
an LED to indicate its operating status.
Table 2
describes LEDs for the QSFP+ ports.
Table 2 1/10GBase-T port LED descriptions
LED status
Steady green
Flashing green
Steady yellow
Specification
RJ-45
1/10 Gbps full duplex, MDI/MDI-X
auto-sensing
•
Category-6 unshielded twisted pair
cable: 55 m (180.45 ft)
•
Category-6 shielded twisted pair
cable: 100 m (328.08 ft)
•
Category-6A or above twisted pair
cable: 100 m (328.08 ft)
•
IEEE 802.3an
•
IEEE 802.3ab
Description
The port is operating at 10 Gbps, and a link is
present on the port.
The port is sending or receiving data at 10
Gbps.
The port is operating at 1 Gbps, and a link is
present on the port.
2
Advertisement
